cleanup box

Box.scad

@@ -1,35 +1,47 @@
 include <BOSL2/std.scad>
 
 // Parameter for console overwrite
-b = 79.8;
+b = 30.0;
-t = 68.5;
+t = 30.0;
-h = 22.5;
+h = 30.0;
 
 module box(b, t, h) {
   difference() {
     // base
-    cuboid([ b, t, h], anchor = [ -1, -1, -1 ],rounding = 1,edges = [ TOP, FRONT + LEFT, FRONT + RIGHT, BACK + LEFT, BACK + RIGHT ]);
+    cuboid(
+      [ b, t, h],
+      anchor = [ -1, -1, -1 ],
+      rounding = 1,
+      edges = [ TOP, FRONT + LEFT, FRONT + RIGHT, BACK + LEFT, BACK + RIGHT ]
+    );
 
     // inner
     translate([ 5, 1.5, 1.5 ]) {
-      cuboid([ b - 10, t - 3, h - 0.5 ], anchor = [ -1, -1, -1 ],
+      cuboid(
-           rounding = 8, edges = [ BOTTOM + FRONT, BOTTOM + LEFT, BOTTOM + BACK, BOTTOM + RIGHT, FRONT + LEFT, FRONT + RIGHT, BACK + LEFT, BACK + RIGHT ]);
+        [ b - 10, t - 3, h - 0.5 ],
+        anchor = [ -1, -1, -1 ],
+        rounding = 8,
+        edges = [ BOTTOM + FRONT, BOTTOM + LEFT, BOTTOM + BACK, BOTTOM + RIGHT, FRONT + LEFT, FRONT + RIGHT, BACK + LEFT, BACK + RIGHT ]
+      );
     }
 
     // left lower
     sideCut(b,t);
+
     // left upper
     translate([0, 0, h]) {
       mirror([0, 0, 1]) {
         sideCut(b, t);
       }
     }
+
     // right lower
     translate([b, 0, 0]) {
       mirror([1, 0, 0]) {
         sideCut(b,t);
       }
     }
+
     // right upper
     translate([b, 0, h]) {
       mirror([1, 0, 0]) {
@@ -45,26 +57,28 @@ module sideCut(b,t) {
   translate([0,-1,0]) {
     rotate([-90,-90,0]) {
       linear_extrude(t/4+4) {
-        polygon(points=[[-1,-1], [-1,1.6], [3.1, 1.6], [6.1,-1]]);
+        polygon(points=[[-1,-1], [-1,1.85], [3.35, 1.85], [6.35,-1]]);
       }
     }
   }
+
   difference() {
     translate([0,t/4+2,0]) {
       rotate([-90,-90,0]) {
         linear_extrude(0.75 * t) {
-          polygon(points=[[-1,-1], [-1,3.2], [6.9, 3.2], [11.2,-1]]);
+          polygon(points=[[-1,-1], [-1,3.45], [7.15, 3.45], [11.45,-1]]);
         }
       }
     }
-    translate([2.2,0.75 * t - 2.4, 0]) {
+
+    translate([2.45,0.75 * t - 2.4, 0]) {
       rotate([90,-90,0]) {
         linear_extrude(0.4 * t + 5) {
-          polygon(points=[[-1,-1], [-1,0.6], [3.3, 0.6], [4.9,-1]]);
+          polygon(points=[[-1,-1], [-1,0.35], [3.05, 0.35], [4.65,-1]]);
         }
       }
     }
   }
 }
 
-box(b + 5, t + 3, h + 4);
+box(b, t, h - 2);

BoxLid.scad

@@ -1,19 +1,22 @@
 include <BOSL2/std.scad>
 
 // Parameter for console overwrite
-b = 79.8;
+b = 30.0;
-t = 68.5;
+t = 30.0;
 
 module box(b, t) {
-    bInner = b - 10;
+  bInner = b - 10;
-    tInner = t - 10;
+  tInner = t - 10;
+
   if (bInner >= 6 && tInner >= 6) {
     difference() {
-      cube([ b, t, 1.5 ], false);
+      cube([ b, t, 2 ], false);
+
       bSpace = 5 + (((bInner + 2) % 8) / 2);
       bAmount = (((bInner + 2) - bSpace + 5) / 8);
       tSpace = 5 + (((tInner + 2) % 8) / 2);
       tAmount = (((tInner + 2) - tSpace + 5) / 8);
+
       for (i = [0:bAmount - 1], j = [0:tAmount - 1]) {
         translate([ bSpace + i * 8, tSpace + j * 8, -1 ]) {
           cube([ 6, 6, 3.5 ], false);
@@ -21,22 +24,24 @@ module box(b, t) {
       }
     }
   } else {
-    cube([ b, t, 1.5 ], false);
+    cube([ b, t, 2 ], false);
   }
-    sideCut(b,t);
+  sideCut(b,t);
-    translate([b, 0, 0]) {
+
-      mirror([1, 0, 0]) {
+  translate([b, 0, 0]) {
-        sideCut(b,t);
+    mirror([1, 0, 0]) {
-      }
+      sideCut(b,t);
     }
+  }
 }
 
 module sideCut(b,t) {
   difference() {
-    translate([0,0,1.5]) {
+    translate([0,0,2]) {
       cube([3, 0.75 * t - 2.5,6.6], false);
     }
-    translate([2.3,t/4+2,0]) {
+
+    translate([2.3,t/4+2,0.5]) {
       rotate([-90,-90,0]) {
         linear_extrude(0.5 * t) {
           polygon(points=[[-1,-1], [-1,1], [7, 1], [5.1,-1]]);
@@ -44,9 +49,10 @@ module sideCut(b,t) {
       }
     }
   }
-  translate([0,0,1.5]) {
+
+  translate([0,0,2]) {
     cube([1.4, t, 3.4], false);
   }
 }
 
-box(b + 5, t + 3);
+box(b, t);