correct spacing again

fix faulty loadin of the names

.helperHerosKeepOut.sh

@@ -20,8 +20,8 @@ echo "Rendering Box-Figures-Heroes..."
 echo "Rendering Box-Figures-Big..."
 "$OPENSCAD" -o "$FOLDER/Box/Box-Figure-Big.stl" "./HeroesKeepOut/Box-Figure-Big.scad"
 
-echo "Rendering Box-Figures-Monster-1..."
+echo "Rendering Box-Figures-Monsters..."
-"$OPENSCAD" -o "$FOLDER/Box/Box-Figure-Monster-1.stl" "./HeroesKeepOut/Box-Figure-Monster-1.scad"
+"$OPENSCAD" -o "$FOLDER/Box/Box-Figure-Monsters.stl" "./HeroesKeepOut/Box-Figure-Monsters.scad"
 
 SCAD_FILE="./HeroesKeepOut/Box-Figure.scad"
 while IFS=',' read -r x y z name; do

Box-Lid.scad

@@ -1,36 +1,38 @@
 include <BOSL2/std.scad>
 
 // Parameter for console overwrite
-b = 30.0;
+x = 30.0;
-t = 30.0;
+y = 30.0;
 
-module lid(b, t) {
+boxLid(x, y);
-  bInner = b - 10;
-  tInner = t - 10;
 
-  if (bInner >= 6 && tInner >= 6) {
+module boxLid(x, y) {
+  xInner = x - 10;
+  yInner = y - 10;
+
+  if (xInner >= 6 && yInner >= 6) {
     difference() {
-      cube([ b, t, 2 ], false);
+      cube([ x, y, 2 ], false);
 
-      bSpace = 5 + (((bInner + 2) % 8) / 2);
+      xSpace = 5 + (((xInner + 2) % 8) / 2);
-      bAmount = (((bInner + 2) - bSpace + 5) / 8);
+      xAmount = (((xInner + 2) - xSpace + 5) / 8);
-      tSpace = 5 + (((tInner + 2) % 8) / 2);
+      ySpace = 5 + (((yInner + 2) % 8) / 2);
-      tAmount = (((tInner + 2) - tSpace + 5) / 8);
+      yAmount = (((yInner + 2) - ySpace + 5) / 8);
 
-      for (i = [0:bAmount - 1], j = [0:tAmount - 1]) translate([ bSpace + i * 8, tSpace + j * 8, -1 ]) cube([ 6, 6, 3.5 ], false);
+      for (i = [0:xAmount - 1], j = [0:yAmount - 1]) translate([ xSpace + i * 8, ySpace + j * 8, -1 ]) cube([ 6, 6, 3.5 ], false);
     }
-  } else cube([ b, t, 2 ], false);
+  } else cube([ x, y, 2 ], false);
 
-  sideCut(b,t);
+  sideCut(y);
 
-  translate([b, 0, 0]) mirror([1, 0, 0]) sideCut(b,t);
+  translate([ x, 0, 0 ]) mirror([ 1, 0, 0 ]) sideCut(y);
 }
 
-module sideCut(b,t) {
+module sideCut(y) {
   difference() {
-    translate([0,0,2]) cube([3, 0.75 * t - 2.5,6.6], false);
+    translate([0,0,2]) cube([3, 0.75 * y - 2.5,6.6], false);
 
-    translate([2.3,t/4+2,0.5]) rotate([-90,-90,0]) linear_extrude(0.5 * t) polygon(points=[
+    translate([2.3,y/4+2,0.5]) rotate([-90,-90,0]) linear_extrude(0.5 * y) polygon(points=[
       [-1,-1],
       [-1,1],
       [7, 1],
@@ -38,7 +40,5 @@ module sideCut(b,t) {
     ]);
   }
 
-  translate([0,0,2]) cube([1.4, t, 3.4], false);
+  translate([0,0,2]) cube([1.4, y, 3.4], false);
 }
-
-lid(b, t);

Box.scad

@@ -1,15 +1,17 @@
 include <BOSL2/std.scad>
 
 // Parameter for console overwrite
-b = 30.0;
+x = 30.0;
-t = 30.0;
+y = 30.0;
-h = 20.0;
+z = 20.0;
 
-module box(b, t, h) {
+box(x, y, z);
+
+module box(x, y, z) {
   difference() {
     // base
     cuboid(
-      [ b, t, h - 2],
+      [ x, y, z - 2],
       anchor = [ -1, -1, -1 ],
       rounding = 1,
       edges = [
@@ -23,7 +25,7 @@ module box(b, t, h) {
 
     // inner
     translate([ 5, 1.5, 1.5 ]) cuboid(
-      [ b - 10, t - 3, h - 0.5 ],
+      [ x - 10, y - 3, z - 0.5 ],
       anchor = [ -1, -1, -1 ],
       rounding = 8,
       edges = [
@@ -38,15 +40,15 @@ module box(b, t, h) {
       ]
     );
 
-    sideCut(t); // left lower
+    sideCut(y); // left lower
-    translate([0, 0, h - 2]) mirror([0, 0, 1]) sideCut(t); // left upper
+    translate([0, 0, z - 2]) mirror([0, 0, 1]) sideCut(y); // left upper
-    translate([b, 0, 0]) mirror([1, 0, 0]) sideCut(t); // right lower
+    translate([x, 0, 0]) mirror([1, 0, 0]) sideCut(y); // right lower
-    translate([b, 0, h - 2]) mirror([1, 0, 0]) mirror([0, 0, 1]) sideCut(t); // right upper
+    translate([x, 0, z - 2]) mirror([1, 0, 0]) mirror([0, 0, 1]) sideCut(y); // right upper
   }
 }
 
-module sideCut(t) {
+module sideCut(y) {
-  translate([0,-1,0]) rotate([-90,-90,0]) linear_extrude(t/4+4) polygon(points=[
+  translate([0,-1,0]) rotate([-90,-90,0]) linear_extrude(y/4+4) polygon(points=[
     [-1,-1],
     [-1,2.1],
     [3.05, 2.1],
@@ -54,14 +56,14 @@ module sideCut(t) {
   ]);
 
   difference() {
-    translate([0,t/4+2,0]) rotate([-90,-90,0]) linear_extrude(0.75 * t) polygon(points=[
+    translate([0,y/4+2,0]) rotate([-90,-90,0]) linear_extrude(0.75 * y) polygon(points=[
       [-1,-1],
       [-1,3.45],
       [7.15, 3.45],
       [11.45,-1]
     ]);
 
-    translate([2.45,0.75 * t - 2.4, 0]) rotate([90,-90,0]) linear_extrude(0.4 * t + 5) polygon(points=[
+    translate([2.45,0.75 * y - 2.4, 0]) rotate([90,-90,0]) linear_extrude(0.4 * y + 5) polygon(points=[
       [-1,-1],
       [-1,0.35],
       [3.05, 0.35],
@@ -69,5 +71,3 @@ module sideCut(t) {
     ]);
   }
 }
-
-box(b, t, h);

HeroesKeepOut/Box-Figure-Big.scad

@@ -1,19 +1,19 @@
 include <BOSL2/std.scad>
 
-boxHelper(45, 53, "Reaper", "Zyklop", "Megaslime");
+boxHelper(45, 39, 53, "Sensenmann", "Steintroll", "König Schleim");
-translate([ 88.5, 39, 0 ]) zrot(180, cp=[0, 0, 0]) boxHelper(45, 53, "Drache", "Medusa", "Träumer");
+translate([ 88.5, 39, 0 ]) zrot(180, cp=[0, 0, 0]) boxHelper(45, 39, 53, "Drache", "Gorgone", "Träumer");
 
-module boxHelper(x, z, frontName, middleName, backName) {
+module boxHelper(x, y, z, frontName, middleName, backName) {
   difference() {
-    cube([ x, 39, z ], false);
+    cube([ x, y, z ], false);
-    translate([ 1.5, 1.5, 1.5 ]) cube([ x - 3, 36, z - 1 ], false);
+    translate([ 1.5, 1.5, 1.5 ]) cube([ x - 3, y - 3, z - 1 ], false);
 
     // windows
-    window(x / 2, 39, z, "Schleim", "Reaper");
+    window(x / 2, y, z, frontName, backName);
 
     // floor
     xInner = x - 10;
-    yInner = 39 - 10;
+    yInner = y - 10;
 
     if (xInner >= 6 && yInner >= 6) {
       xSpace = 5 + (((xInner + 2) % 8) / 2);
@@ -31,16 +31,6 @@ module boxHelper(x, z, frontName, middleName, backName) {
       halign="center"
     );
   }
-
-  difference() {
-    union() {
-      translate([ 0, 12.5, 0 ]) cube([ x, 1.5, z ],  false);
-      translate([ 0, 25, 0 ]) cube([ x, 1.5, z ],  false);
-    }
-
-    windowHelper(x / 2, 12.5, z, "");
-    windowHelper(x / 2, 25, z, "");
-  }
 }
 
 module window(x, y, z, frontName, backName) {

HeroesKeepOut/Box-Figure-Configs.txt

@@ -1,13 +1,5 @@
-32,83,28.5,Schleim
+33,31,29,Geister
-31,73,34.5,Unholde
+26,82,25,Pilzknilche
-28,63,29.5,Skelette
+36,51,27,Spinnen
-29,53,27.5,Echsenvolk
+33,45,34,Werwolf
-39,23,33.5,Hexen
+21,53,35,Vampir
-38,33,31.5,Geister
-31,43,34.5,Gnolle
-29,83,26.5,Pilze
-38,53,27,Spinne
-30,93,25.5,Rattenvolk
-27,43,26.5,Hellgrün
-51,45,33.5,Werwolf
-55,25,35.5,Vampir

HeroesKeepOut/Box-Figure-Monsters.scad

@@ -4,11 +4,10 @@ include <BOSL2/std.scad>
 x = 172;
 y = 84;
 z = 35.5;
-name = "Vampir";
 
-figureHolder(x, y, z, name);
+figureHolder(x, y, z);
 
-module figureHolder(x, y, z, name) {
+module figureHolder(x, y, z) {
   difference() {
     cube([ x, y, z ], false);
     translate([ 1.5, 1.5, 1.5 ]) cube([ x - 3, y - 3, z - 1 ], false);
@@ -97,9 +96,8 @@ module figureHolder(x, y, z, name) {
   translate([ 87.5, 55.5, 0 ]) cube([ 28, 1.5, 6.5], false); // Hexen
   translate([ 87.5, 78, 0 ]) cube([ 28, 1.5, 6.5], false); // Hexen
   translate([ 115.5, 57, 0 ]) cube([ 1.5, 22.5, 6.5], false); // Hexen
-  translate([ 123.5, 57, 0 ]) cube([ 1.5, 27, 6.5], false); // Feen
+  translate([ 127, 57, 0 ]) cube([ 1.5, 27, 6.5], false); // Feen
-  translate([ 125, 81, 0 ]) cube([ 42, 1.5, 6.5], false); // Feen
+  translate([ 128.5, 81.5, 0 ]) cube([ 42, 1.5, 6.5], false); // Feen
-  translate([ 167, 57, 0 ]) cube([ 1.5, 27, 6.5], false); // Feen
 
   /*
   */

HeroesKeepOut/Box-Figure.scad

@@ -0,0 +1,73 @@
+include <BOSL2/std.scad>
+
+x = 28;
+y = 29;
+z = 28;
+name = "Figure";
+
+figureBox(x + 3, y + 3, z + 1.5, name);
+
+module figureBox(x, y, z, name) {
+  difference() {
+    cube([ x, y, z ], false);
+    translate([ 1.5, 1.5, 1.5 ]) cube([ x - 3, y - 3, z - 1 ], false);
+
+    // windows
+    window(x / 2, y, z, name, "");
+
+    // floor
+    xInner = x - 10;
+    yInner = y - 10;
+
+    if (xInner >= 6 && yInner >= 6) {
+      xSpace = 5 + (((xInner + 2) % 8) / 2);
+      xAmount = (((xInner + 2) - xSpace + 5) / 8);
+      ySpace = 5 + (((yInner + 2) % 8) / 2);
+      yAmount = (((yInner + 2) - ySpace + 5) / 8);
+
+      for (i = [0:xAmount - 1], j = [0:yAmount - 1]) translate([ xSpace + i * 8, ySpace + j * 8, -1 ]) cube([ 6, 6, 3.5 ], false);
+    }
+  }
+}
+
+module window(x, y, z, frontName, backName) {
+  windowHelper(x, 0, z, frontName);
+  zrot(180, cp=[x, y / 2, 0]) windowHelper(x, 0, z, backName);
+}
+
+module windowHelper(x, y, z, name) {
+  translate([ 7, y - 1, 8 ]) cuboid(
+    [ 2 * (x - 7), 3.5, z - 8 ],
+    anchor = [-1, -1, -1],
+    rounding = 3,
+    edges = [
+      BOTTOM + LEFT,
+      BOTTOM + RIGHT
+    ]
+  );
+
+  difference() {
+    translate([ 1.5, y - 1, z - 5 ]) cube([ 2 * (x - 1.5), 3.5, 6 ], false);
+    translate([ 1, y - 1, z - 6 ]) cuboid(
+      [ 6, 3.5 , 6 ],
+      anchor = [-1, -1, -1],
+      rounding = 5,
+      edges = TOP + RIGHT
+    );
+
+    translate([ 2 * x - 7, y - 1, z - 6 ]) cuboid(
+      [ 6, 3.5 , 6 ],
+      anchor = [-1, -1, -1],
+      rounding = 5,
+      edges = TOP + LEFT
+    );
+  }
+
+  translate([ x, y + 0.6, 4 ]) rotate([ 90, 0, 0 ]) linear_extrude(height = 1.6) text(
+    name,
+    size = 4,
+    font = "Arial:style=Bold",
+    halign="center",
+    valign="center"
+  );
+}

HeroesKeepOut/Box-Items-Lid.scad

@@ -3,9 +3,9 @@ use <../Box-Lid.scad>
 
 difference() {
   union() {
-    lid(178, 38);
+    boxLid(178, 38);
-    translate([92.95, 21.2, 0]) cube([85.1, 16.8, 2], false); // frame area around card pocket
+    translate([ 92.95, 21.2, 0 ]) cube([ 85.1, 16.8, 2 ], false); // frame area around card pocket
   }
 
-  translate([96.75, 26, -1]) cube([81.4, 13, 41], false); // clean area for card pocket
+  translate([ 96.75, 26, -1 ]) cube([ 81.4, 13, 41 ], false); // clean area for card pocket
 }

HeroesKeepOut/Box-Tokens.scad

@@ -28,16 +28,16 @@ difference() {
   translate([ 6 , 6, 16.5 ]) cube([ 51, 26, 15 ]); // Helden
   translate([ 59.5 , 19, 14 ]) rotate(90, [ 0, 1, 0 ]) cylinder(h = 21, r = 13, center = false); // Portale
   translate([ 59.5 , 6, 16.5 ]) cube([ 21, 26, 15 ]); // Portale
-  translate([ 84 , 19, 14 ]) rotate(90, [ 0, 1, 0 ]) cylinder(h = 11, r = 13, center = false); // Rest rund
+  translate([ 83 , 18.5, 14 ]) rotate(90, [ 0, 1, 0 ]) cylinder(h = 12, r = 13.5, center = false); // Rest rund
-  translate([ 84 , 6, 16.5 ]) cube([ 11, 26, 15 ]); // Rest rund
+  translate([ 84 , 5.5, 16.5 ]) cube([ 11, 27, 15 ]); // Rest rund
-  translate([100, 15.5, 4.5]) cube([ 11, 19, 26 ], false); // Rest
+  translate([ 100, 15.5, 4.5 ]) cube([ 11, 19, 26 ], false); // Rest
-  translate([110, 14.5, 1.5]) cube([ 2, 21, 29 ], false); // Rest
+  translate([ 110, 14, 1.5 ]) cube([ 3, 22, 29 ], false); // Rest
-  translate([118, 14.5, 8.5]) cube([ 15, 21, 22 ], false); // Fässer
+  translate([ 118, 14.5, 8.5 ]) cube([ 15, 21, 22 ], false); // Fässer
-  translate([138, 13.5, 1.5]) cube([ 33, 23, 29 ], false); // Truhe
+  translate([ 137, 13, 1.5 ]) cube([ 34, 24, 29 ], false); // Truhe
 
   union() {
-    translate([4, 19, 29.5]) rotate(90, [ 0, 1, 0 ]) cylinder(h = 92.75, r = 7.5, center = false);
+    translate([ 4, 19, 29.5 ]) rotate(90, [ 0, 1, 0 ]) cylinder(h = 92.75, r = 7.5, center = false);
-    translate([95, 25, 29.5]) rotate(90, [ 0, 1, 0 ]) cylinder(h = 79, r = 7.5, center = false);
+    translate([ 94.9, 25, 29.5 ]) rotate(90, [ 0, 1, 0 ]) cylinder(h = 79.1, r = 7.5, center = false);
   }
 
   // clean area for card pocket