correct spacing again

fix faulty loadin of the names

.helperHerosKeepOut.sh

@@ -1,24 +1,56 @@
 OPENSCAD="openscad"
-SCAD_FILE="./CardHolder.scad"
 FOLDER=STL/HeroesKeepOut
 
 mkdir -p STL
 mkdir -p $FOLDER
 
-# ── Cards ─────────────────────────────────────────────────────────────
+# ── Boxes ─────────────────────────────────────────────────────────────
-while IFS=',' read -r b t h name; do
+mkdir -p $FOLDER/Box
+echo "Rendering Box-Items..."
+"$OPENSCAD" -o "$FOLDER/Box/Box-Items.stl" "./HeroesKeepOut/Box-Items.scad"
+"$OPENSCAD" -o "$FOLDER/Box/Box-Items-Lid.stl" "./HeroesKeepOut/Box-Items-Lid.scad"
+
+echo "Rendering Box-Tokens..."
+"$OPENSCAD" -o "$FOLDER/Box/Box-Tokens.stl" "./HeroesKeepOut/Box-Tokens.scad"
+"$OPENSCAD" -o "$FOLDER/Box/Box-Tokens-Lid.stl" "./HeroesKeepOut/Box-Items-Lid.scad"
+
+echo "Rendering Box-Figures-Heroes..."
+"$OPENSCAD" -o "$FOLDER/Box/Box-Figure-Heroes.stl" "./HeroesKeepOut/Box-Figure-Heroes.scad"
+
+echo "Rendering Box-Figures-Big..."
+"$OPENSCAD" -o "$FOLDER/Box/Box-Figure-Big.stl" "./HeroesKeepOut/Box-Figure-Big.scad"
+
+echo "Rendering Box-Figures-Monsters..."
+"$OPENSCAD" -o "$FOLDER/Box/Box-Figure-Monsters.stl" "./HeroesKeepOut/Box-Figure-Monsters.scad"
+
+SCAD_FILE="./HeroesKeepOut/Box-Figure.scad"
+while IFS=',' read -r x y z name; do
   # Remove quotes around name, replace spaces with -
   label=$(printf '%s' "$name" | sed 's/"//g; s/ /-/g')
-  output="$FOLDER/Cards-$label.stl"
+  output="$FOLDER/Box/Box-Figure-$label.stl"
 
   echo "Rendering $output..."
   "$OPENSCAD" \
-    -D "b=$b" \
+    -D "x=$x" \
-    -D "t=$t" \
+    -D "y=$y" \
-    -D "h=$h" \
+    -D "z=$z" \
     -D "name=\"$name\"" \
     -o "$output" "$SCAD_FILE"
-done <./HeroesKeepOut/cardConfigs.txt
+done <./HeroesKeepOut/Box-Figure-Configs.txt
 
-echo "Rendering $output..."
+# ── Cards ─────────────────────────────────────────────────────────────
-"$OPENSCAD" -o "$output" "$SCAD_FILE"
+SCAD_FILE="./CardHolder.scad"
+mkdir -p $FOLDER/Cards
+while IFS=',' read -r b t h name; do
+  # Remove quotes around name, replace spaces with -
+  label=$(printf '%s' "$name" | sed 's/"//g; s/ /-/g')
+  output="$FOLDER/Cards/Cards-$label.stl"
+
+  echo "Rendering $output..."
+  "$OPENSCAD" \
+    -D "x=$b" \
+    -D "y=$t" \
+    -D "z=$h" \
+    -D "name=\"$name\"" \
+    -o "$output" "$SCAD_FILE"
+done <./HeroesKeepOut/Card-Configs.txt

Box-Lid.scad

@@ -0,0 +1,44 @@
+include <BOSL2/std.scad>
+
+// Parameter for console overwrite
+x = 30.0;
+y = 30.0;
+
+boxLid(x, y);
+
+module boxLid(x, y) {
+  xInner = x - 10;
+  yInner = y - 10;
+
+  if (xInner >= 6 && yInner >= 6) {
+    difference() {
+      cube([ x, y, 2 ], false);
+
+      xSpace = 5 + (((xInner + 2) % 8) / 2);
+      xAmount = (((xInner + 2) - xSpace + 5) / 8);
+      ySpace = 5 + (((yInner + 2) % 8) / 2);
+      yAmount = (((yInner + 2) - ySpace + 5) / 8);
+
+      for (i = [0:xAmount - 1], j = [0:yAmount - 1]) translate([ xSpace + i * 8, ySpace + j * 8, -1 ]) cube([ 6, 6, 3.5 ], false);
+    }
+  } else cube([ x, y, 2 ], false);
+
+  sideCut(y);
+
+  translate([ x, 0, 0 ]) mirror([ 1, 0, 0 ]) sideCut(y);
+}
+
+module sideCut(y) {
+  difference() {
+    translate([0,0,2]) cube([3, 0.75 * y - 2.5,6.6], false);
+
+    translate([2.3,y/4+2,0.5]) rotate([-90,-90,0]) linear_extrude(0.5 * y) polygon(points=[
+      [-1,-1],
+      [-1,1],
+      [7, 1],
+      [5.1,-1]
+    ]);
+  }
+
+  translate([0,0,2]) cube([1.4, y, 3.4], false);
+}

Box.scad

@@ -1,70 +1,73 @@
 include <BOSL2/std.scad>
 
 // Parameter for console overwrite
-b = 79.8;
+x = 30.0;
-t = 68.5;
+y = 30.0;
-h = 22.5;
+z = 20.0;
 
-module box(b, t, h) {
+box(x, y, z);
+
+module box(x, y, z) {
   difference() {
     // base
-    cuboid([ b, t, h], anchor = [ -1, -1, -1 ],rounding = 1,edges = [ TOP, FRONT + LEFT, FRONT + RIGHT, BACK + LEFT, BACK + RIGHT ]);
+    cuboid(
+      [ x, y, z - 2],
+      anchor = [ -1, -1, -1 ],
+      rounding = 1,
+      edges = [
+        TOP,
+        FRONT + LEFT,
+        FRONT + RIGHT,
+        BACK + LEFT,
+        BACK + RIGHT
+      ]
+    );
 
     // inner
-    translate([ 5, 1.5, 1.5 ]) {
+    translate([ 5, 1.5, 1.5 ]) cuboid(
-      cuboid([ b - 10, t - 3, h - 0.5 ], anchor = [ -1, -1, -1 ],
+      [ x - 10, y - 3, z - 0.5 ],
-           rounding = 8, edges = [ BOTTOM + FRONT, BOTTOM + LEFT, BOTTOM + BACK, BOTTOM + RIGHT, FRONT + LEFT, FRONT + RIGHT, BACK + LEFT, BACK + RIGHT ]);
+      anchor = [ -1, -1, -1 ],
-    }
+      rounding = 8,
+      edges = [
+        BOTTOM + FRONT,
+        BOTTOM + LEFT,
+        BOTTOM + BACK,
+        BOTTOM + RIGHT,
+        FRONT + LEFT,
+        FRONT + RIGHT,
+        BACK + LEFT,
+        BACK + RIGHT
+      ]
+    );
 
-    // left lower
+    sideCut(y); // left lower
-    sideCut(b,t);
+    translate([0, 0, z - 2]) mirror([0, 0, 1]) sideCut(y); // left upper
-    // left upper
+    translate([x, 0, 0]) mirror([1, 0, 0]) sideCut(y); // right lower
-    translate([0, 0, h]) {
+    translate([x, 0, z - 2]) mirror([1, 0, 0]) mirror([0, 0, 1]) sideCut(y); // right upper
-      mirror([0, 0, 1]) {
-        sideCut(b, t);
-      }
-    }
-    // right lower
-    translate([b, 0, 0]) {
-      mirror([1, 0, 0]) {
-        sideCut(b,t);
-      }
-    }
-    // right upper
-    translate([b, 0, h]) {
-      mirror([1, 0, 0]) {
-        mirror([0, 0, 1]) {
-          sideCut(b, t);
-        }
-      }
-    }
   }
 }
 
-module sideCut(b,t) {
+module sideCut(y) {
-  translate([0,-1,0]) {
+  translate([0,-1,0]) rotate([-90,-90,0]) linear_extrude(y/4+4) polygon(points=[
-    rotate([-90,-90,0]) {
+    [-1,-1],
-      linear_extrude(t/4+4) {
+    [-1,2.1],
-        polygon(points=[[-1,-1], [-1,1.6], [3.1, 1.6], [6.1,-1]]);
+    [3.05, 2.1],
-      }
+    [6.35,-1]
-    }
+  ]);
-  }
+
   difference() {
-    translate([0,t/4+2,0]) {
+    translate([0,y/4+2,0]) rotate([-90,-90,0]) linear_extrude(0.75 * y) polygon(points=[
-      rotate([-90,-90,0]) {
+      [-1,-1],
-        linear_extrude(0.75 * t) {
+      [-1,3.45],
-          polygon(points=[[-1,-1], [-1,3.2], [6.9, 3.2], [11.2,-1]]);
+      [7.15, 3.45],
-        }
+      [11.45,-1]
-      }
+    ]);
-    }
+
-    translate([2.2,0.75 * t - 2.4, 0]) {
+    translate([2.45,0.75 * y - 2.4, 0]) rotate([90,-90,0]) linear_extrude(0.4 * y + 5) polygon(points=[
-      rotate([90,-90,0]) {
+      [-1,-1],
-        linear_extrude(0.4 * t + 5) {
+      [-1,0.35],
-          polygon(points=[[-1,-1], [-1,0.6], [3.3, 0.6], [4.9,-1]]);
+      [3.05, 0.35],
-        }
+      [4.65,-1]
-      }
+    ]);
-    }
   }
 }
-
-box(b + 5, t + 3, h + 4);

BoxLid.scad

@@ -1,52 +0,0 @@
-include <BOSL2/std.scad>
-
-// Parameter for console overwrite
-b = 79.8;
-t = 68.5;
-
-module box(b, t) {
-    bInner = b - 10;
-    tInner = t - 10;
-  if (bInner >= 6 && tInner >= 6) {
-    difference() {
-      cube([ b, t, 1.5 ], false);
-      bSpace = 5 + (((bInner + 2) % 8) / 2);
-      bAmount = (((bInner + 2) - bSpace + 5) / 8);
-      tSpace = 5 + (((tInner + 2) % 8) / 2);
-      tAmount = (((tInner + 2) - tSpace + 5) / 8);
-      for (i = [0:bAmount - 1], j = [0:tAmount - 1]) {
-        translate([ bSpace + i * 8, tSpace + j * 8, -1 ]) {
-          cube([ 6, 6, 3.5 ], false);
-        }
-      }
-    }
-  } else {
-    cube([ b, t, 1.5 ], false);
-  }
-    sideCut(b,t);
-    translate([b, 0, 0]) {
-      mirror([1, 0, 0]) {
-        sideCut(b,t);
-      }
-    }
-}
-
-module sideCut(b,t) {
-  difference() {
-    translate([0,0,1.5]) {
-      cube([3, 0.75 * t - 2.5,6.6], false);
-    }
-    translate([2.3,t/4+2,0]) {
-      rotate([-90,-90,0]) {
-        linear_extrude(0.5 * t) {
-          polygon(points=[[-1,-1], [-1,1], [7, 1], [5.1,-1]]);
-        }
-      }
-    }
-  }
-  translate([0,0,1.5]) {
-    cube([1.4, t, 3.4], false);
-  }
-}
-
-box(b + 5, t + 3);

CardHolder.scad

@@ -1,85 +1,93 @@
 include <BOSL2/std.scad>
 
 // Parameter for console overwrite
-b = 58;
+x = 58;
-t = 3;
+y = 5;
-h = 88;
+z = 88;
 name = "Cards";
 
-module cardHolder(b, t, h, name) {
+cardHolder(x + 5, y + 3, z + 4, name);
+
+module cardHolder(x, y, z, name) {
 
   // floor
-  bInner = b - 10;
+  xInner = x - 10;
-    tInner = t - 10;
+  yInner = y - 10;
-  if (bInner >= 6 && tInner >= 6) {
+  if (xInner >= 6 && yInner >= 6) {
     difference() {
-      cube([ b, t, 1.5 ], false);
+      cube([ x, y, 1.5 ], false);
-      bSpace = 5 + (((bInner + 2) % 8) / 2);
+
-      bAmount = (((bInner + 2) - bSpace + 5) / 8);
+      xSpace = 5 + (((xInner + 2) % 8) / 2);
-      tSpace = 5 + (((tInner + 2) % 8) / 2);
+      xAmount = (((xInner + 2) - xSpace + 5) / 8);
-      tAmount = (((tInner + 2) - tSpace + 5) / 8);
+      ySpace = 5 + (((yInner + 2) % 8) / 2);
-      for (i = [0:bAmount - 1], j = [0:tAmount - 1]) {
+      yAmount = (((yInner + 2) - ySpace + 5) / 8);
-        translate([ bSpace + i * 8, tSpace + j * 8, -1 ]) {
+      for (i = [0:xAmount - 1], j = [0:yAmount - 1]) translate([ xSpace + i * 8, ySpace + j * 8, -1 ]) cube([ 6, 6, 3.5 ], false);
-          cube([ 6, 6, 3.5 ], false);
-        }
-      }
     }
-  } else {
+  } else cube([ x, y, 1.5 ], false);
-    cube([ b, t, 1.5 ], false);
-  }
 
   // left
-  translate([ 0, 0, 1.5 ]) {
+  translate([ 0, 0, 1.5 ]) cuboid(
-    cuboid([ 1.5, t, h - 1.5 ], anchor = [ -1, -1, -1 ],
+    [ 1.5, y, z - 1.5 ],
-           rounding = min(10, t - 1.5), edges = FRONT + TOP);
+    anchor = [ -1, -1, -1 ],
-  }
+    rounding = min(10, y - 1.5),
+    edges = FRONT + TOP
+  );
 
   // right
-  translate([ b - 1.5, 0, 1.5 ]) {
+  translate([ x - 1.5, 0, 1.5 ]) cuboid(
-    cuboid([ 1.5, t, h - 1.5 ], anchor = [ -1, -1, -1 ],
+    [ 1.5, y, z - 1.5 ],
-           rounding = min(10, t - 1.5), edges = FRONT + TOP);
+    anchor = [ -1, -1, -1 ],
-  }
+    rounding = min(10, y - 1.5),
+    edges = FRONT + TOP
+  );
 
   // back
-  translate([ 1.5, t - 1.5, 1.5 ]) {
+  translate([ 1.5, y - 1.5, 1.5 ]) {
-    cuboid([ 10, 1.5, h -1.5], anchor = [ -1, -1, -1 ], rounding = 5,
+    cuboid(
-           edges = RIGHT + TOP);
+      [ 10, 1.5, z -1.5],
-    translate([ b - 13, 0, 0 ]) {
+      anchor = [ -1, -1, -1 ],
-      cuboid([ 10, 1.5, h - 1.5 ], anchor = [ -1, -1, -1 ], rounding = 5,
+      rounding = 5,
-             edges = LEFT + TOP);
+      edges = RIGHT + TOP
-    }
+    );
-    translate([ 10, 0, 0 ]) {
+
-      difference() {
+    translate([ x - 13, 0, 0 ]) cuboid(
-        difference() {
+      [ 10, 1.5, z - 1.5 ],
-          cube([ b - 23, 1.5, h - 1 ], false);
+      anchor = [ -1, -1, -1 ],
-          translate([ 0, -1, 15 ]) {
+      rounding = 5,
-            cuboid([ b - 23, 3, h - 12 ], anchor = [ -1, -1, -1 ],
+      edges = LEFT + TOP
-                   rounding = 10, edges = [ LEFT + BOTTOM, RIGHT + BOTTOM ]);
+    );
-          }
+
-        }
+    translate([ 10, 0, 0 ]) difference() {
-        translate([ -1, -1, 35 ]) { cube([ b - 21, 3, h - 20 ], false); }
+      cube([ x - 23, 1.5, z - 1 ], false);
-      }
+
+      translate([ 0, -1, 15 ]) cuboid(
+        [ x - 23, 3, z - 12 ],
+        anchor = [ -1, -1, -1 ],
+        rounding = 10,
+        edges = [ LEFT + BOTTOM, RIGHT + BOTTOM ]
+      );
+      translate([ -1, -1, 35 ]) cube([ x - 21, 3, z - 20 ], false);
     }
   }
 
   // front
   translate([ 1, 0, 1 ]) {
     difference() {
-      cuboid([ 10, 1.5, h - 21 ], anchor = [ -1, -1, -1 ], rounding = 5,
+      cuboid(
-             edges = RIGHT + TOP);
+        [ 10, 1.5, z - 21 ],
-      translate([ 7.5, 0.4, 2.5 ]) {
+        anchor = [ -1, -1, -1 ],
-        rotate([ 0, -90, 90 ]) {
+        rounding = 5,
-          linear_extrude(height = 0.6) {
+        edges = RIGHT + TOP
-            text(name, size = 5, font = "Arial:style=Bold");
+      );
-          }
+
-        }
+      translate([ 7.5, 0.4, 2.5 ]) rotate([ 0, -90, 90 ]) linear_extrude(height = 0.6) text(name, size = 5, font = "Arial:style=Bold");
-      }
-    }
-    translate([ b - 12, 0, 0 ]) {
-      cuboid([ 10, 1.5, h - 21 ], anchor = [ -1, -1, -1 ], rounding = 5,
-             edges = LEFT + TOP);
     }
+
+    translate([ x - 12, 0, 0 ]) cuboid(
+      [ 10, 1.5, z - 21 ],
+      anchor = [ -1, -1, -1 ],
+      rounding = 5,
+      edges = LEFT + TOP
+    );
   }
 }
-
-cardHolder(b + 5, t + 3, h + 4, name);

HeroesKeepOut/Box-Figure-Big.scad

@@ -0,0 +1,76 @@
+include <BOSL2/std.scad>
+
+boxHelper(45, 39, 53, "Sensenmann", "Steintroll", "König Schleim");
+translate([ 88.5, 39, 0 ]) zrot(180, cp=[0, 0, 0]) boxHelper(45, 39, 53, "Drache", "Gorgone", "Träumer");
+
+module boxHelper(x, y, z, frontName, middleName, backName) {
+  difference() {
+    cube([ x, y, z ], false);
+    translate([ 1.5, 1.5, 1.5 ]) cube([ x - 3, y - 3, z - 1 ], false);
+
+    // windows
+    window(x / 2, y, z, frontName, backName);
+
+    // floor
+    xInner = x - 10;
+    yInner = y - 10;
+
+    if (xInner >= 6 && yInner >= 6) {
+      xSpace = 5 + (((xInner + 2) % 8) / 2);
+      xAmount = (((xInner + 2) - xSpace + 5) / 8);
+      ySpace = 5 + (((yInner + 2) % 8) / 2);
+      yAmount = (((yInner + 2) - ySpace + 5) / 8);
+
+      for (i = [0:xAmount - 1], j = [0:yAmount - 1]) translate([ xSpace + i * 8, ySpace + j * 8, -1 ]) cube([ 6, 6, 3.5 ], false);
+    }
+
+    translate([ 0.6, 19.5, z / 2 ]) rotate([ 0, -90, 0 ]) linear_extrude(height = 1.6) text(
+      middleName,
+      size = 4,
+      font = "Arial:style=Bold",
+      halign="center"
+    );
+  }
+}
+
+module window(x, y, z, frontName, backName) {
+  windowHelper(x, 0, z, frontName);
+  zrot(180, cp=[x, y / 2, 0]) windowHelper(x, 0, z, backName);
+}
+
+module windowHelper(x, y, z, name) {
+  translate([ 7, y - 1, 8 ]) cuboid(
+    [ 2 * (x - 7), 3.5, z - 8 ],
+    anchor = [-1, -1, -1],
+    rounding = 3,
+    edges = [
+      BOTTOM + LEFT,
+      BOTTOM + RIGHT
+    ]
+  );
+
+  difference() {
+    translate([ 1.5, y - 1, z - 5 ]) cube([ 2 * (x - 1.5), 3.5, 6 ], false);
+    translate([ 1, y - 1, z - 6 ]) cuboid(
+      [ 6, 3.5 , 6 ],
+      anchor = [-1, -1, -1],
+      rounding = 5,
+      edges = TOP + RIGHT
+    );
+
+    translate([ 2 * x - 7, y - 1, z - 6 ]) cuboid(
+      [ 6, 3.5 , 6 ],
+      anchor = [-1, -1, -1],
+      rounding = 5,
+      edges = TOP + LEFT
+    );
+  }
+
+  translate([ x, y + 0.6, 4 ]) rotate([ 90, 0, 0 ]) linear_extrude(height = 1.6) text(
+    name,
+    size = 4,
+    font = "Arial:style=Bold",
+    halign="center",
+    valign="center"
+  );
+}

HeroesKeepOut/Box-Figure-Configs.txt

@@ -0,0 +1,5 @@
+33,31,29,Geister
+26,82,25,Pilzknilche
+36,51,27,Spinnen
+33,45,34,Werwolf
+21,53,35,Vampir

HeroesKeepOut/Box-Figure-Heroes.scad

@@ -0,0 +1,67 @@
+include <BOSL2/std.scad>
+
+difference() {
+  cube([ 175, 55, 37 ], false);
+  translate([ 1.5, 1.5, 1.5 ]) cube([ 172, 52, 36 ], false);
+
+  // windows
+  window(16.875, 55, 37, "Neuling");
+  window(49.5, 55, 37, "Krieger");
+  window(83.25, 55, 37, "Schurkin");
+  window(113.5, 55, 37, "Magier");
+  window(149.25, 55, 37, "Bogenschützin");
+}
+
+// deviders
+translate([ 8.25, 1.5, 1.5]) cube([1, 52, 5.5], false);
+translate([ 27.5, 1.5, 1.5]) cube([1, 52, 5.5], false);
+translate([ 38, 1.5, 1.5]) cube([1, 52, 5.5], false);
+translate([ 63, 1.5, 1.5]) cube([1, 52, 5.5], false);
+translate([ 73.25, 1.5, 1.5]) cube([1, 52, 5.5], false);
+translate([ 95.25, 1.5, 1.5]) cube([1, 52, 5.5], false);
+translate([ 99.25, 1.5, 1.5]) cube([1, 52, 5.5], false);
+translate([ 129.75, 1.5, 1.5]) cube([1, 52, 5.5], false);
+translate([ 137.5, 1.5, 1.5]) cube([1, 52, 5.5], false);
+translate([ 163, 1.5, 1.5]) cube([1, 52, 5.5], false);
+
+module window(x, y, z, name) {
+  windowHelper(x, 0, z, name);
+  windowHelper(x, y - 1, z, "");
+}
+
+module windowHelper(x, y, z, name) {
+  translate([ x - 10, y - 1, 12 ]) cuboid(
+    [ 23, 3.5, z - 12 ],
+    anchor = [-1, -1, -1],
+    rounding = 5,
+    edges = [
+      BOTTOM + LEFT,
+      BOTTOM + RIGHT
+    ]
+  );
+
+  difference() {
+    translate([ x - 15, y - 1, z - 5 ]) cube([ 33, 3.5, 6 ], false);
+    translate([ x - 16, y - 1, z - 6 ]) cuboid(
+      [ 6, 3.5 , 6 ],
+      anchor = [-1, -1, -1],
+      rounding = 5,
+      edges = TOP + RIGHT
+    );
+
+    translate([ x + 13, y - 1, z - 6 ]) cuboid(
+      [ 6, 3.5 , 6 ],
+      anchor = [-1, -1, -1],
+      rounding = 5,
+      edges = TOP + LEFT
+    );
+  }
+
+  translate([ x + 1.5, y + 0.6, 6 ]) rotate([ 90, 0, 0 ]) linear_extrude(height = 1.6) text(
+    name,
+    size = 4,
+    font = "Arial:style=Bold",
+    halign="center",
+    valign="center"
+  );
+}

HeroesKeepOut/Box-Figure-Monsters.scad

@@ -0,0 +1,146 @@
+include <BOSL2/std.scad>
+
+// Parameter for console overwrite
+x = 172;
+y = 84;
+z = 35.5;
+
+figureHolder(x, y, z);
+
+module figureHolder(x, y, z) {
+  difference() {
+    cube([ x, y, z ], false);
+    translate([ 1.5, 1.5, 1.5 ]) cube([ x - 3, y - 3, z - 1 ], false);
+
+    // windows
+    window(32 / 2, y, z, "Schleim");
+
+    // floor
+    xInner = x - 10;
+    yInner = y - 10;
+
+    if (xInner >= 6 && yInner >= 6) {
+      xSpace = 5 + (((xInner + 2) % 8) / 2);
+      xAmount = (((xInner + 2) - xSpace + 5) / 8);
+      ySpace = 5 + (((yInner + 2) % 8) / 2);
+      yAmount = (((yInner + 2) - ySpace + 5) / 8);
+
+      for (i = [0:xAmount - 1], j = [0:yAmount - 1]) translate([ xSpace + i * 8, ySpace + j * 8, -1 ]) cube([ 6, 6, 3.5 ], false);
+    }
+
+    translate([ 94 / 2 + 32, 0.6, 4 ]) rotate([ 90, 0, 0 ]) linear_extrude(height = 1.6) text(
+      "Rattenvolk",
+      size = 4,
+      font = "Arial:style=Bold",
+      halign="center",
+      valign="center"
+    );
+    translate([ 43 / 2 + 127.5, 0.6, 4 ]) rotate([ 90, 0, 0 ]) linear_extrude(height = 1.6) text(
+      "Unholde",
+      size = 4,
+      font = "Arial:style=Bold",
+      halign="center",
+      valign="center"
+    );
+    translate([ 74 / 2 + 32, 0.6, 12 ]) rotate([ 90, 0, 0 ]) linear_extrude(height = 1.6) text(
+      "Gnoll",
+      size = 4,
+      font = "Arial:style=Bold",
+      halign="center",
+      valign="center"
+    );
+    translate([ 63 / 2 + 104.5, 0.6, 12 ]) rotate([ 90, 0, 0 ]) linear_extrude(height = 1.6) text(
+      "Skelette",
+      size = 4,
+      font = "Arial:style=Bold",
+      halign="center",
+      valign="center"
+    );
+    translate([ 54 / 2 + 32, 0.6, 20 ]) rotate([ 90, 0, 0 ]) linear_extrude(height = 1.6) text(
+      "Echsenvolk",
+      size = 4,
+      font = "Arial:style=Bold",
+      halign="center",
+      valign="center"
+    );
+    translate([ 36 / 2 + 84.5, 0.6, 20 ]) rotate([ 90, 0, 0 ]) linear_extrude(height = 1.6) text(
+      "Hexen",
+      size = 4,
+      font = "Arial:style=Bold",
+      halign="center",
+      valign="center"
+    );
+    translate([ 42 / 2 + 122, 0.6, 20 ]) rotate([ 90, 0, 0 ]) linear_extrude(height = 1.6) text(
+      "Feen",
+      size = 4,
+      font = "Arial:style=Bold",
+      halign="center",
+      valign="center"
+    );
+  }
+
+  // deviders
+  translate([ 30.5, 1.5, 0 ]) cube([ 1.5, y - 3, 6.5], false); // Schleim
+  translate([ 32, 5, 0 ]) cube([ 94, 1.5, 6.5], false); // Rattenvolk
+  translate([ 32, 19.5, 0 ]) cube([ 94, 1.5, 6.5], false); // Rattenvolk
+  translate([ 126, 5, 0 ]) cube([ 1.5, 21, 6.5], false); // Rattenvolk
+  translate([ 127.5, 6, 0 ]) cube([ 43, 1.5, 6.5], false); // Unholde
+  translate([ 127.5, 24.5, 0 ]) cube([ 43, 1.5, 6.5], false); // Unholde
+  translate([ 32, 24, 0 ]) cube([ 74, 1.5, 6.5], false); // Gnolle
+  translate([ 32, 50.5, 0 ]) cube([ 74, 1.5, 6.5], false); // Gnolle
+  translate([ 106, 24, 0 ]) cube([ 1.5, 31.5, 6.5], false); // Gnolle
+  translate([ 107.5, 28, 0 ]) cube([ 63, 1.5, 6.5], false); // Skelette
+  translate([ 107.5, 55.5, 0 ]) cube([ 63, 1.5, 6.5], false); // Skelette
+  translate([ 32, 76, 0 ]) cube([ 54, 1.5, 6.5], false); // Echsenvolk
+  translate([ 86, 52, 0 ]) cube([ 1.5, 27.5, 6.5], false); // Echsenvolk
+  translate([ 87.5, 55.5, 0 ]) cube([ 28, 1.5, 6.5], false); // Hexen
+  translate([ 87.5, 78, 0 ]) cube([ 28, 1.5, 6.5], false); // Hexen
+  translate([ 115.5, 57, 0 ]) cube([ 1.5, 22.5, 6.5], false); // Hexen
+  translate([ 127, 57, 0 ]) cube([ 1.5, 27, 6.5], false); // Feen
+  translate([ 128.5, 81.5, 0 ]) cube([ 42, 1.5, 6.5], false); // Feen
+
+  /*
+  */
+}
+
+module window(x, y, z, name) {
+  windowHelper(x, 0, z, name);
+  windowHelper(x, y - 1, z, "");
+}
+
+module windowHelper(x, y, z, name) {
+  translate([ 7, y - 1, 8 ]) cuboid(
+    [ 2 * (x - 7), 3.5, z - 8 ],
+    anchor = [-1, -1, -1],
+    rounding = 3,
+    edges = [
+      BOTTOM + LEFT,
+      BOTTOM + RIGHT
+    ]
+  );
+
+  difference() {
+    translate([ 1.5, y - 1, z - 5 ]) cube([ 2 * (x - 1.5), 3.5, 6 ], false);
+    translate([ 1, y - 1, z - 6 ]) cuboid(
+      [ 6, 3.5 , 6 ],
+      anchor = [-1, -1, -1],
+      rounding = 5,
+      edges = TOP + RIGHT
+    );
+
+    translate([ 2 * x - 7, y - 1, z - 6 ]) cuboid(
+      [ 6, 3.5 , 6 ],
+      anchor = [-1, -1, -1],
+      rounding = 5,
+      edges = TOP + LEFT
+    );
+  }
+
+  translate([ x, y + 0.6, 4 ]) rotate([ 90, 0, 0 ]) linear_extrude(height = 1.6) text(
+    name,
+    size = 4,
+    font = "Arial:style=Bold",
+    halign="center",
+    valign="center"
+  );
+}

HeroesKeepOut/Box-Figure.scad

@@ -0,0 +1,73 @@
+include <BOSL2/std.scad>
+
+x = 28;
+y = 29;
+z = 28;
+name = "Figure";
+
+figureBox(x + 3, y + 3, z + 1.5, name);
+
+module figureBox(x, y, z, name) {
+  difference() {
+    cube([ x, y, z ], false);
+    translate([ 1.5, 1.5, 1.5 ]) cube([ x - 3, y - 3, z - 1 ], false);
+
+    // windows
+    window(x / 2, y, z, name, "");
+
+    // floor
+    xInner = x - 10;
+    yInner = y - 10;
+
+    if (xInner >= 6 && yInner >= 6) {
+      xSpace = 5 + (((xInner + 2) % 8) / 2);
+      xAmount = (((xInner + 2) - xSpace + 5) / 8);
+      ySpace = 5 + (((yInner + 2) % 8) / 2);
+      yAmount = (((yInner + 2) - ySpace + 5) / 8);
+
+      for (i = [0:xAmount - 1], j = [0:yAmount - 1]) translate([ xSpace + i * 8, ySpace + j * 8, -1 ]) cube([ 6, 6, 3.5 ], false);
+    }
+  }
+}
+
+module window(x, y, z, frontName, backName) {
+  windowHelper(x, 0, z, frontName);
+  zrot(180, cp=[x, y / 2, 0]) windowHelper(x, 0, z, backName);
+}
+
+module windowHelper(x, y, z, name) {
+  translate([ 7, y - 1, 8 ]) cuboid(
+    [ 2 * (x - 7), 3.5, z - 8 ],
+    anchor = [-1, -1, -1],
+    rounding = 3,
+    edges = [
+      BOTTOM + LEFT,
+      BOTTOM + RIGHT
+    ]
+  );
+
+  difference() {
+    translate([ 1.5, y - 1, z - 5 ]) cube([ 2 * (x - 1.5), 3.5, 6 ], false);
+    translate([ 1, y - 1, z - 6 ]) cuboid(
+      [ 6, 3.5 , 6 ],
+      anchor = [-1, -1, -1],
+      rounding = 5,
+      edges = TOP + RIGHT
+    );
+
+    translate([ 2 * x - 7, y - 1, z - 6 ]) cuboid(
+      [ 6, 3.5 , 6 ],
+      anchor = [-1, -1, -1],
+      rounding = 5,
+      edges = TOP + LEFT
+    );
+  }
+
+  translate([ x, y + 0.6, 4 ]) rotate([ 90, 0, 0 ]) linear_extrude(height = 1.6) text(
+    name,
+    size = 4,
+    font = "Arial:style=Bold",
+    halign="center",
+    valign="center"
+  );
+}

HeroesKeepOut/Box-Heroes.scad

@@ -1,68 +0,0 @@
-include <BOSL2/std.scad>
-
-// Parameter for console overwrite
-b = 178;
-t = 38;
-h = 20;
-
-module box(b, t, h) {
-  difference() {
-    difference() {
-      // base
-      cuboid([ b, t, h], anchor = [ -1, -1, -1 ],rounding = 1,edges = [ TOP, FRONT + LEFT, FRONT + RIGHT, BACK + LEFT, BACK + RIGHT ]);
-    }
-
-    // left lower
-    sideCut(b,t);
-    // left upper
-    translate([0, 0, h]) mirror([0, 0, 1]) sideCut(b, t);
-    // right lower
-    translate([b, 0, 0]) mirror([1, 0, 0]) sideCut(b,t);
-    // right upper
-    translate([b, 0, h]) mirror([1, 0, 0]) mirror([0, 0, 1]) sideCut(b, t);
-
-    // inner
-    translate([ 21, 19, h-11 ]) cylinder(h = 12, r = 13, center = false);
-    translate([14, -1, h-11]) cube([14, t + 2, 18.5], false);
-    translate([ 55, 19, h-11 ]) cylinder(h = 12, r = 13, center = false);
-    translate([49, -1, h-11]) cube([14, t + 2, 18.5], false);
-    translate([ 89, 23, h-11 ]) cylinder(h = 12, r = 13, center = false);
-    translate([83, -1, h-11]) cube([14, t + 2, 18.5], false);
-    translate([ 123, 25, h-11 ]) cylinder(h = 12, r = 13, center = false);
-    translate([117, -1, h-11]) cube([14, t + 2, 18.5], false);
-    translate([ 157, 25, h-11 ]) cylinder(h = 12, r = 13, center = false);
-    translate([151, -1, h-11]) cube([14, t + 2, 18.5], false);
-    
-    // clean area for card pocket
-    translate([b- 79, -1, -1]) cube([80, 13, 41], false);
-  }
-}
-
-module sideCut(b,t) {
-  translate([0,-1,0]) {
-    rotate([-90,-90,0]) {
-      linear_extrude(t/4+4) {
-        polygon(points=[[-1,-1], [-1,1.6], [3.1, 1.6], [6.1,-1]]);
-      }
-    }
-  }
-  difference() {
-    translate([0,t/4+2,0]) {
-      rotate([-90,-90,0]) {
-        linear_extrude(0.75 * t) {
-          polygon(points=[[-1,-1], [-1,3.2], [6.9, 3.2], [11.2,-1]]);
-        }
-      }
-    }
-    translate([2.2,0.75 * t - 2.4, 0]) {
-      rotate([90,-90,0]) {
-        linear_extrude(0.4 * t + 5) {
-          polygon(points=[[-1,-1], [-1,0.6], [3.3, 0.6], [4.9,-1]]);
-        }
-      }
-    }
-  }
-}
-
-box(b, t, h);
-

HeroesKeepOut/Box-Items-Lid.scad

@@ -1,66 +1,11 @@
 include <BOSL2/std.scad>
+use <../Box-Lid.scad>
 
-// Parameter for console overwrite
+difference() {
-b = 178;
+  union() {
-t = 38;
+    boxLid(178, 38);
-h = 20;
+    translate([ 92.95, 21.2, 0 ]) cube([ 85.1, 16.8, 2 ], false); // frame area around card pocket
-
-module box(b, t) {
-  bInner = b - 10;
-  tInner = t - 10;
-  difference() {
-    union () {
-      if (bInner >= 6 && tInner >= 6) {
-        difference() {
-          cube([ b, t, 1.5 ], false);
-          bSpace = 5 + (((bInner + 2) % 8) / 2);
-          bAmount = (((bInner + 2) - bSpace + 5) / 8);
-          tSpace = 5 + (((tInner + 2) % 8) / 2);
-          tAmount = (((tInner + 2) - tSpace + 5) / 8);
-          for (i = [0:bAmount - 1], j = [0:tAmount - 1]) {
-           translate([ bSpace + i * 8, tSpace + j * 8, -1 ]) {
-             cube([ 6, 6, 3.5 ], false);
-           }
-         }
-       }
-     } else {
-       cube([ b, t, 1.5 ], false);
-     }
-     sideCut(b,t);
-     translate([b, 0, 0]) {
-       mirror([1, 0, 0]) {
-         sideCut(b,t);
-       }
-   }
-   // frame area around card pocket
-   translate([b-83, t - 16, 0]) {
-     cube([83, 16, 1.5], false);
   }
+
+  translate([ 96.75, 26, -1 ]) cube([ 81.4, 13, 41 ], false); // clean area for card pocket
 }
-
-    // clean area for card pocket
-    translate([b-79, t - 12, -1]) {
-      cube([80, 13, 41], false);
-    }
-  }
-}
-
-module sideCut(b,t) {
-  difference() {
-    translate([0,0,1.5]) {
-      cube([3, 0.75 * t - 2.5,6.6], false);
-    }
-    translate([2.3,t/4+2,0]) {
-      rotate([-90,-90,0]) {
-        linear_extrude(0.5 * t) {
-          polygon(points=[[-1,-1], [-1,1], [7, 1], [5.1,-1]]);
-        }
-      }
-    }
-  }
-  translate([0,0,1.5]) {
-    cube([1.4, t, 3.4], false);
-  }
-}
-
-box(b, t);

HeroesKeepOut/Box-Items.scad

@@ -1,118 +1,54 @@
 include <BOSL2/std.scad>
+use <../Box.scad>
 
-// Parameter for console overwrite
+difference() {
-b = 178;
+  box(178, 38, 20);
-t = 38;
+  translate([96.75, -1, -1]) cube([79.4, 13, 41], false); // clean area for card pocket
-h = 20;
+}
 
-module box(b, t, h) {
+// deviders
-  difference() {
+translate([154, 12, 1.5]) cube([1, 24.5, 16.5], false);
+translate([129, 12, 1.5]) cube([1, 24.5, 16.5], false);
+translate([104, 12, 1.5]) cube([1, 24.5, 16.5], false);
+translate([79, 1.5, 1.5]) cube([1, 35, 16.5], false);
+translate([54, 1.5, 1.5]) cube([1, 35, 16.5], false);
+
+// card pocket
+difference() {
+  translate([96.75, 0, 0]) {
     difference() {
-      // base
+      cube([79.4, 12, 40], false);
-      cuboid([ b, t, h], anchor = [ -1, -1, -1 ],rounding = 1,edges = [ TOP, FRONT + LEFT, FRONT + RIGHT, BACK + LEFT, BACK + RIGHT ]);
+      translate([1.5, -1, 1.5]) cube([76.4, 11.5, 41], false);
-
-      // inner
-      translate([ 5, 1.5, 1.5 ]) {
-        cuboid([ b - 10, t - 3, h - 0.5 ], anchor = [ -1, -1, -1 ],
-           rounding = 8, edges = [ BOTTOM + FRONT, BOTTOM + LEFT, BOTTOM + BACK, BOTTOM + RIGHT, FRONT + LEFT, FRONT + RIGHT, BACK + LEFT, BACK + RIGHT ]);
-      }
     }
 
-    // left lower
+    translate([1.5, 0, 1.5]) cuboid(
-    sideCut(b,t);
+      [6, 1.5, 38.5],
-    // left upper
+      anchor = [-1, -1, -1],
-    translate([0, 0, h]) {
+      rounding = 5,
-      mirror([0, 0, 1]) {
+      edges = TOP + RIGHT
-        sideCut(b, t);
+    );
-      }
-    }
-    // right lower
-    translate([b, 0, 0]) {
-      mirror([1, 0, 0]) {
-        sideCut(b,t);
-      }
-    }
-    // right upper
-    translate([b, 0, h]) {
-      mirror([1, 0, 0]) {
-        mirror([0, 0, 1]) {
-          sideCut(b, t);
-        }
-      }
-    }
 
-    // clean area for card pocket
+    translate([71.9, 0, 1.5]) cuboid(
-    translate([b- 79, -1, -1]) {
+      [6, 1.5, 38.5],
-      cube([77.4, 13, 41], false);
+      anchor = [-1, -1, -1],
-    }
+      rounding = 5, edges = TOP + LEFT
-  }
+    );
 
-  // deviders
-  translate([150, 12, 1.5]) {
-    cube([1, 24.5, 18.5], false);
-  }
-  translate([127, 12, 1.5]) {
-    cube([1, 24.5, 18.5], false);
-  }
-  translate([104, 12, 1.5]) {
-    cube([1, 24.5, 18.5], false);
-  }
-  translate([81, 1.5, 1.5]) {
-    cube([1, 35, 18.5], false);
-  }
-  translate([58, 1.5, 1.5]) {
-    cube([1, 35, 18.5], false);
-  }
-
-  // card pocket
-  translate([b- 80, 0, ]) {
-    difference() {
-      cube([78.4, 12, 40], false);
-      translate([1.5, -1, 1.5]) {
-        cube([75.4, 11.5, 41], false);
-      }
-    }
-    translate([1.5, 0, 1.5]) {
-      cuboid([6, 1.5, 38.5], anchor = [-1, -1, -1], rounding = 5, edges = TOP + RIGHT);
-    }
-    translate([70.9, 0, 1.5]) {
-      cuboid([6, 1.5, 38.5], anchor = [-1, -1, -1], rounding = 5, edges = TOP + LEFT);
-    }
     translate([7.5, 0, 1.5]) {
       difference() {
-        cube([63.4, 1.5, 11], false);
+        cube([64.4, 1.5, 11], false);
-        translate([0, -1, 6]) {
+        translate([0, -1, 6]) cuboid(
-          cuboid([63.4, 4.5, 6], anchor = [-1, -1, -1], rounding = 5, edges = [ BOTTOM + LEFT, BOTTOM + RIGHT]);
+          [64.4, 4.5, 6],
-        }
+          anchor = [-1, -1, -1],
+          rounding = 5,
+          edges = [
+            BOTTOM + LEFT,
+            BOTTOM + RIGHT
+          ]
+        );
       }
     }
   }
-}
 
-module sideCut(b,t) {
+  translate([178, 0, 0]) mirror([1, 0, 0]) sideCut(43);
-  translate([0,-1,0]) {
-    rotate([-90,-90,0]) {
-      linear_extrude(t/4+4) {
-        polygon(points=[[-1,-1], [-1,1.6], [3.1, 1.6], [6.1,-1]]);
-      }
-    }
-  }
-  difference() {
-    translate([0,t/4+2,0]) {
-      rotate([-90,-90,0]) {
-        linear_extrude(0.75 * t) {
-          polygon(points=[[-1,-1], [-1,3.2], [6.9, 3.2], [11.2,-1]]);
-        }
-      }
-    }
-    translate([2.2,0.75 * t - 2.4, 0]) {
-      rotate([90,-90,0]) {
-        linear_extrude(0.4 * t + 5) {
-          polygon(points=[[-1,-1], [-1,0.6], [3.3, 0.6], [4.9,-1]]);
-        }
-      }
-    }
-  }
 }
-
-box(b, t, h);

HeroesKeepOut/Box-Tokens.scad

@@ -0,0 +1,45 @@
+include <BOSL2/std.scad>
+use <../Box.scad>
+
+difference() {
+  difference() {
+    // base
+    cuboid(
+      [ 178, 38, 29.5],
+      anchor = [ -1, -1, -1 ],
+      rounding = 1,
+      edges = [
+        TOP,
+        FRONT + LEFT,
+        FRONT + RIGHT,
+        BACK + LEFT,
+        BACK + RIGHT
+      ]
+    );
+  }
+
+  sideCut(43); // left lower
+  translate([ 0, 0, 29.5 ]) mirror([ 0, 0, 1 ]) sideCut(43); // left upper
+  translate([ 178, 0, 0 ]) mirror([ 1, 0, 0 ]) sideCut(43); // right lower
+  translate([ 178, 0, 29.5 ]) mirror([ 1, 0, 0 ]) mirror([ 0, 0, 1 ]) sideCut(43); // right upper
+
+  // inner
+  translate([ 6 , 19, 16.5 ]) rotate(90, [ 0, 1, 0 ]) cylinder(h = 51, r = 13, center = false); // Helden
+  translate([ 6 , 6, 16.5 ]) cube([ 51, 26, 15 ]); // Helden
+  translate([ 59.5 , 19, 14 ]) rotate(90, [ 0, 1, 0 ]) cylinder(h = 21, r = 13, center = false); // Portale
+  translate([ 59.5 , 6, 16.5 ]) cube([ 21, 26, 15 ]); // Portale
+  translate([ 83 , 18.5, 14 ]) rotate(90, [ 0, 1, 0 ]) cylinder(h = 12, r = 13.5, center = false); // Rest rund
+  translate([ 84 , 5.5, 16.5 ]) cube([ 11, 27, 15 ]); // Rest rund
+  translate([ 100, 15.5, 4.5 ]) cube([ 11, 19, 26 ], false); // Rest
+  translate([ 110, 14, 1.5 ]) cube([ 3, 22, 29 ], false); // Rest
+  translate([ 118, 14.5, 8.5 ]) cube([ 15, 21, 22 ], false); // Fässer
+  translate([ 137, 13, 1.5 ]) cube([ 34, 24, 29 ], false); // Truhe
+
+  union() {
+    translate([ 4, 19, 29.5 ]) rotate(90, [ 0, 1, 0 ]) cylinder(h = 92.75, r = 7.5, center = false);
+    translate([ 94.9, 25, 29.5 ]) rotate(90, [ 0, 1, 0 ]) cylinder(h = 79.1, r = 7.5, center = false);
+  }
+
+  // clean area for card pocket
+  translate([ 96.75, -1, -1 ]) cube([ 81.4, 13, 41 ], false);
+}